CCNA 200-301 Complete course – Not Just another CCNA course
About Course
Learn CCNA from a Triple CCIE (R&S, Security, SP) certified instructor in just 28+ Hours. The instructor has 15+ years of extensive experience in the network industry. It is an engaging course which include animations on several important topics, infographic slides and extensive lab practice.
The course is divided into six different chapters as follows:
1. Network Fundamentals
2. Network Access
3. IP Connectivity
4. IP Services
5. Security Fundamentals
6. Automation and Programmability
In “Network fundamentals” chapter, we have covered History of Networking Standards,TCP/IP, OSI, Transport Layer, TCP & UDP, Multiplexing, Virtualization, Cloud Computing, Cabling types, IPv4 & IPv6 addressing, IPv4 subnetting, Default Gateway.
In “Network Access” chapter, we have covered Switching technology, Wireless technology, and Cisco WLAN deployments.
In “IP Connectivity” chapter, we have covered IP routing process, static and dynamic routing, and FHRP protocols.
In “IP Services” chapter, we have covered DNS, NAT, DHCP, SNMP, FTP, TFTP, and QOS.
“Security fundaments” chapter is composed of security terminologies, different types of attacks & vulnerabilities, AAA, TACACS+, RADIUS, Security program, Internet VPN, ACLs, standard and extended ACL.
“Automation & programmability” chapter is comprised of Types of planes, controllers, SDN, NBI, SBI, APIC, ACI, Cisco SDA, Rest API, Software CRUD actions, HTTP verbs, URI, DATA Serialization, JSON, traditional configuration model versus centralized configuration model, ANSIBLE, PUPPET, and CHEF.
So, are you ready to Jumpstart your career in networking?
What Will You Learn?
- This course covers all exam topics of the CCNA 200-301 Exam and will enable you to pass the exam. It includes all learning notes and hands-on Lab Manuals.
- Become confident in Network & Security Fundamentals, Routing, Switching, wireless Technology, IP services, Network Automation & programmability
- To setup, configure and troubleshoot real networks in packet tracer and GNS3 tool. Also, learn how real-world network works
- Learn different career options in the networking field, what kind of jobs you can take, and why you must pursue your career in this field?
- This course will make you from ZERO to HERO in the networking field
- It will give you WINGS to FLY HIGH and take your career to the next level
Course Content
Introduction
Introduction
-
Instructor’s profile, why it is the best course, Exam topics, & Course Duration
00:00 -
What is your REASON to study CCNA?
00:00 -
What is CCNA, who is CISCO, why to follow cisco learning program
00:00 -
What Jobs you can take as a Network Engineer?
00:00
Chapter 1: Network Fundamentals
History of Networking Standards,TCP/IP, OSI, Transport Layer, TCP & UDP, Multiplexing, Virtualization, Cloud Computing, Cabling types, IPv4 & IPv6 addressing, IPv4 subnetting, Default Gateway
-
History of Networking Standards
00:00 -
What is TCP/IP?
00:00 -
Comparing OSI and TCP/IP Models
00:00 -
TCP/IP Transport Layer
00:00 -
Compare TCP to UDP
00:00 -
Multiplexing using port numbers
00:00 -
TCP connection establishment and termination
00:00 -
Server Virtualization
00:00 -
Cloud Computing Services
00:00 -
Ethernet cable & Fiber optic cable
00:00 -
Understanding Binary, Decimal, and Hexadecimal numbers
00:00 -
What is an IP Address?
00:00 -
Understanding Network Addressing and its different classes
00:00 -
Private IP addresses (RFC 1918), Layer 2 & 3 Broadcast, Subnet Mask, and CIDR
00:00 -
QUIZ – IPV4 – TCP/IP – Cloud
00:00 -
Understanding IPv4 Subnetting Rules with help of Class C Network Address Example
00:00 -
IPv4 Subnetting using Class B addresses
00:00 -
IPv4 Subnetting using Class A addresses
00:00 -
QUIZ IP Subnetting
00:00 -
Understanding Unicast, Broadcast, Multicast and IPv4 address types
00:00 -
What is an IPv6 Address?
00:00 -
IPv6 address expression, IPv6 address types, and IPv6 global routing prefix
00:00 -
IPv6 Global Routing Prefix & IPv6 Subnetting
00:00 -
How IPv6 Addressing works? Manual, Stateless & Stateful Auto-Configuration
00:00 -
What is Anycast Address? And how does it work?
00:00 -
QUIZ – IPv6
00:00 -
IP Parameters for a Client OS: IP, Subnet Mask, Default Gateway, DNS
00:00 -
Verify IP parameters for Client OS (Windows, Mac OS, Linux)
00:00
Chapter 2: Network Access
Explain network component types, VLAN, Switch port types, STP, POE, LAN topologies, Wireless Technology, Wireless authentication methods, Access Point Types, WLAN Deployments, Light-weight AP modes
-
Introduction
00:00 -
Understanding Collision Domain and Broadcast Domain
00:00 -
Understanding Different Types of Network Devices
00:00 -
What is a HUB device? How does it work?
00:00 -
What is a Switch? Understanding Layer 2 Switching & unknown unicast flooding
00:00 -
What is a Bridge Device? How does it work?
00:00 -
Half Duplex and Full Duplex Ethernet
00:00 -
What is a VLAN? How does it work?
00:00 -
Understanding Switch Port Types: Access, Voice Access, Trunk
00:00 -
What is a TRUNK port? How does it work?
00:00 -
Understanding Native VLAN, Untagged frames, ISL, 802.1Q, VTP
00:00 -
Understanding INTER-VLAN routing and its different scenarios
00:00 -
Cisco Packet Tracer: Introduction and Setup
00:00 -
Understanding Cisco IOS Software, Configuration Files, Memory Types, and CLI
00:00 -
LAB1: Configure and verify initial switch configuration including remote access
00:00 -
LAB2: Verify network status and switch operation using basic utilities
00:00 -
LAB3: Configure speed, duplex, and description
00:00 -
LAB4: Configure, verify, and troubleshoot VLANs (Normal/Extended)
00:00 -
LAB5: Configure, verify, and troubleshoot Inter-Switch connectivity
00:00 -
LAB5A: Configure Inter-VLAN routing – Scenario 1
00:00 -
LAB5B: Configure Inter-VLAN routing – Scenario 2
00:00 -
LAB5C: Configure Inter-VLAN routing – Scenario 3
00:00 -
Spanning Tree Protocol (STP)
00:00 -
Spanning Tree Terminologies
00:00 -
Spanning Tree Port Roles
00:00 -
Spanning Tree Port Stages
00:00 -
Understanding Convergence
00:00 -
Spanning Tree Link cost
00:00 -
Spanning Tree protocol Operation
00:00 -
Spanning Tree Protocol Animation
-
Types of Spanning Tree Protocols
00:00 -
LAB6: Spanning tree & toolkit configuration
00:00 -
LAB7: Configure and verify layer 2 protocols (CDP,LLDP)
00:00 -
QUIZ – Physical – CDP – LLDP
00:00 -
Understanding EtherChannel
00:00 -
LAB8: Configure, verify, and troubleshoot L2/L3 EtherChannel
00:00 -
Understanding Power Over Ethernet (POE), Terminology and operation
00:00 -
QUIZ – SWITCHING
00:00 -
Campus LAN topologies and design terminologies
00:00 -
QUIZ – Design
00:00 -
Understanding Wireless Technology
00:00 -
Understanding Wireless Access point (AP)
00:00 -
Understanding Other Wireless Topologies
00:00 -
Understanding Radio Frequency (RF), Wireless Band, and channels
00:00 -
Access Point and Wireless Standards
00:00 -
Securing a Wireless Connection
00:00 -
Understanding Wireless Authentication methods
00:00 -
Understanding EAP and its authentication methods
00:00 -
Draft LessonUnderstanding TKIP (Temporal Key Integrity Protocol)
00:00 -
Understanding CCMP & GCMP
00:00 -
Understanding WPA, WPA2, and WPA3
00:00 -
Understanding Different Types of Access Points
00:00 -
Understanding Light Weight AP(Access-point) and WLC (Wireless LAN Controller)
00:00 -
Understanding Cloud Based AP Architecture and Securing WLAN
00:00 -
Scaling AP (Access point) and WLC (Wireless LAN Controller)
00:00 -
Understanding Cisco WLAN Deployments options
00:00 -
Understanding Cisco Light-Weight AP(Access-Point) modes
00:00 -
QUIZ – WLAN
00:00
Chapter 3: IP Connectivity
Explain functionality of a router, types of routing, OSPF, FHRP, HSRP
-
Router – What is it and how it works?
00:00 -
Longest Match Rule
00:00 -
IP Routing Process
00:00 -
Cisco Router Internal Process
00:00 -
Routing Table
00:00 -
Routing Protocol Basics
00:00 -
Types of Routing
00:00 -
Static Routing
00:00 -
Default Route
00:00 -
GNS3: Introduction and setup guide
00:00 -
GNS3: Setting up Lab Topology
00:00 -
LAB 1: Network Topology Setup with Initial configuration
00:00 -
LAB 2: Static and Default Routing
00:00 -
Dynamic Routing
00:00 -
OSPF Introduction, Areas, OSPF Routers
00:00 -
OSPF Terminologies
00:00 -
OSPF Network Types
00:00 -
OSPF Operation
00:00 -
OSPF Metric
00:00 -
OSPF: Single Area vs Multi Area
00:00 -
OSPF Adjacency requirements
00:00 -
OSPF: How to Memorize it?
00:00 -
LAB 3: Enabling OSPF
00:00 -
LAB 4: Configure single area OSPF version 2
00:00 -
FHRP (First Hop Redundancy Protocols)
00:00 -
HSRP (Hot Standby Router Protocol)
00:00 -
LAB 5: IPv6 Topology setup with Initial configuration
00:00 -
LAB 6: IPv6 static routing
00:00 -
QUIZ – Routing
00:00
Chapter 4: IP Services
DNS, NAT, DHCP, SNMP, FTP, TFTP, QOS
-
DNS: What is it and how it works?
00:00 -
NAT (Network Address Translation) – Introduction, types, terminology
00:00 -
NAT: How does it work?
00:00 -
LAB 1: STATIC NAT
00:00 -
LAB 2: Dynamic NAT
00:00 -
LAB 3: NAT Overload (PAT)
00:00 -
LAB 4: NTP
00:00 -
DHCP: What is it and how it works?
00:00 -
LAB 5: DHCP
00:00 -
LAB 6: DHCP Relay
00:00 -
QUIZ – DHCP – DNS
00:00 -
SNMP: What is it and how it works?
00:00 -
Securing SNMP
00:00 -
Understanding FTP Protocol, FTP Server, Client, and connection process
00:00 -
FTP connection types and modes
00:00 -
Understanding TFTP
00:00 -
QOS: Overview and why we need it?
00:00 -
QOS: How it manages network traffic
00:00 -
Understanding different types of network traffic and their QoS requirements
00:00 -
QOS tools
00:00 -
QOS: Classification & Marking tool, Queuing tools
00:00 -
QOS Marking: Understanding EF, AF, and CS markings
00:00 -
QOS: Congestion Managment(Queuing), Round Robin Scheduling(Prioritization), LLQ
00:00 -
QOS: Classification & Marking tool, Queuing tools
00:00 -
QOS: Shaping and policing
00:00 -
QOS: Trust Boundaries
00:00 -
QOS: Prioritization strategy for Data, Voice, and Video
00:00 -
QUIZ – QOS
00:00 -
QUIZ – SERVICES
00:00
Chapter 5: Security Fundamentals
security terminologies, different types of attacks & vulnerabilities, AAA, TACACS+, RADIUS, Security program, Internet VPN, ACL, Standard ACL, Extended ACL
-
Understanding Security Terminologies
00:00 -
Address spoofing attacks
00:00 -
Denial of Service (DOS) attack
00:00 -
Reflection and Amplification attack
00:00 -
Review: TCP/IP and ARP
00:00 -
Man in the Middle attack
00:00 -
Reconnaissance attacks, Buffer overflow attacks, and Malware
00:00 -
Human Vulnerabilities
00:00 -
Password Vulnerabilities and Password alternatives
00:00 -
AAA, TACACS+, and RADIUS
00:00 -
Developing a security program
00:00 -
Internet VPN and its types
00:00 -
LAB 1: Switchport security
00:00 -
LAB 2: SSH
00:00 -
ACL(Access-lists)
00:00 -
Types of Access-list, Inbound and outbound ACL
00:00 -
ACL implementation guidelines
00:00 -
Standard Access-List
00:00 -
Wild Card Mask
00:00 -
LAB 3: Standard Access-list
00:00 -
LAB 4: Standard Access-list
00:00 -
LAB 5: Controlling VTY(Telnet/SSH) access
00:00 -
Extended Access-list
00:00 -
LAB 6: Extended ACL
00:00 -
Named Access-list
00:00 -
LAB 7: Named Standard Access-list
00:00 -
LAB 8: Named Extended Access-list
00:00 -
QUIZ – Security
00:00
Chapter 6: Network Automation & Programmability
Types of planes, controllers, SDN, NBI, SBI, APIC, ACI, Cisco SDA, Rest API, Software CRUD actions, HTTP verbs, URI, DATA Serialization, JSON, ANSIBLE, PUPPET, CHEF
-
Data Plane, Control Plane, and Managment Plane
00:00 -
Controllers, Software Defined Architecture, NBI, and SBI
00:00 -
Network programmability and SDN solutions
00:00 -
Cisco Application Centric Infrastructure (APIC)
00:00 -
ACI Operating Model with Intent Based Networking
00:00 -
Cisco APIC Enterprise Model
00:00 -
Comparing Traditional vs controller-based networks
00:00 -
Cisco SDA (Software Defined Access) and DNA (digital network architecture)
00:00 -
Cisco SDA – Underlay
00:00 -
Cisco SDA underlay roles and SDA overlay
00:00 -
Cisco SDA – IP Address usage
00:00 -
Revisiting Layer 2 switching, Layer 3 routing & forwarding process
00:00 -
Understanding SDA forwarding
00:00 -
Cisco DNA center & SDA Security
00:00 -
Traditional network management platform vs DNA center
00:00 -
REST API
00:00 -
Data & Variables
00:00 -
REST API & HTTP, Software CRUD actions and HTTP verbs
00:00 -
HTTP verbs and URI
00:00 -
DATA Serialization
00:00 -
Understanding JSON
00:00 -
Per device (Traditional) configuration model vs Centralized configuration model
00:00 -
Configuration provisioning, templates and variables, management tools & Files
00:00 -
ANSIBLE, PUPPET, and CHEF
00:00 -
QUIZ – SDN
00:00